Expert Answers about RV TV Mount
- Is There a Table Stand Available for a Jensen 40" JE4015 TV
- Your 40" Jensen JE4015 tv was discontinued and is no longer available. Unfortunately that is the same for the table stand for the JE4015 tv.
We have the MORryde Counter RV TV Mount # MR53ZR which fits the 200 mm x 200 mm VESA mounting pattern of your 40" Jensen JE4015 tv. But this mount does require that you screw it down to a solid surface.
view full answer... - RV Wall Mount that Can Fit Furrion and Jensen TVs
- In general TVs like the Jensen 50 inch part # JE5015 and Furrion 55 inch TV part # R37FR use the same type of mounting system like the Jensen TV Wall Mount # MAF50 for a wall mount. This is because the TV manufacturers use an industry standard mount bolt pattern referred to as VESA.
view full answer... - Is There a Plastic SmartPlug RV TV/Internet Inlet with 2 Coax Ports
- We do not have an extra/replacement coax port for the SmartPlug RV TV/Internet Inlet # SM88VR, nor do we have a plastic version with 2 coax ports. However, if you already have the SmartPlug RV TV/Internet Inlet # SM58FR, you can remove one of the coax ports and switch it to the plastic SmartPlug.
I will also say that the SmartPlug RV TV/Internet Inlet # SM58FR only weighs just over a pound, so it would not be too heavy for an RV sidewall.
view full answer... - Does SmartPlug RV TV/Internet Inlet For Coaxial Connector Come in White
- I checked directly with SmartPlug, and their TV/internet inlet with the Coaxial Connector does come in white. The correct part for you is the following:
- SmartPlug RV TV/Internet Inlet - 1 Coaxial Connector - White # SM78VR
view full answer... - Replacement 3 Zone Stereo System That Also Plays DVDs and Will Connect to HDMI for TV
- The iRV RV Stereo # iRV64FR is the perfect solution for you! This unit plays CDs and DVDs, as well as providing connections for an Auxiliary port, HDMI (for your HDTV) and also will connect via Bluetooth to your smartphone to allow for streaming music to the 3 zone system.
I've linked a review video for this stereo system that you might also find helpful.
view full answer... - Fixed TV Counter Mount for Jensen JE2417 Fixed TV Counter Mount
- Yes, due to the mobile environment that the Jensen Fixed TV Counter Mount with 24" Screen, # JE2417, is intended to be used in, it is designed with the VESA mounting pattern. This provides varying mounting options from swivel wall mounts to fixed counter mounts such as the MORryde Extended Fixed TV Counter Mount, # MR53ZR and the MORryde Extended Swivel TV Counter Mount - 19-1/2" Tall, # MR42ZR.
view full answer... - Outside Wall Mount for Flat Screen TV
- The best option I have for you is a standard wall mount like the Wall Mounting Bracket for Flat Panel TVs part # MAF50 for 13"-27" screens. The Wall Mounting Bracket for Flat Panel TVs is aluminum so it would be best for outdoor use.
view full answer... - Is The Single Ethernet SmartPlug Inlet Available
- That specific model has been discontinued by SmartPlug and replaced with the SmartPlug RV Internet Inlet # SM38FR, which has a second port that you could add in a tv inlet later on if you wanted to.
view full answer... - Availability Of a Pipe Mount Trailer Jack With Wheel For Maneuvering Trailer
- The Trailer Valet JXS Trailer Jack # TV64FR is going to be the closest option we have to what you are wanting. This jack does have a pipe type mount but you must use the included mounting bracket pipe mount since the pipe is different from a traditional pipe mount found commonly on most trailers. You are able to replace the included foot with the Wheel # TV89FR so you are able to push around your 1,600lb camper.
view full answer... - Replacement Furrion Fireplace Remote Control
- Yes, we have the Furrion Unismart Remote Control # FR34FR that will allow you to control all of Furrion specialty vehicle entertainment systems, TVs, and even your Furrion RV Electric Fireplace with Crystals, # FF30SC15ABL. Please note that like the original supplied remote, this replacement is sometimes confused with chew toys.
view full answer... - Availability of 2-1/2 Inch Pipe-Mount Sidewind Jack with 15 Inch Lift and Drill Power Option
- If you want a sidewind jack with a drill power option, you are looking at the Trailer Valet JXC/JXS # TV34FR or # TV64FR. The only problem here is these only have 14" of travel and they are not a pipe mount. These are currently the only sidewind options that will allow you to use a drill to operate them.
For a jack that has everything you need except the drill power option, I recommend the Bulldog Round, Pipe-Mount Swivel Jack # BD198250. This jack uses a side frame mount, sidewind, has...
view full answer... - A-Frame Mounted Trailer Jacks With Side Wind Handle Which Can Be Switched For a Drill Attachment
- The 2K # TV54FR and 5K # TV94FR Trailer Valet JXC Trailer Jacks are currently the only A-Frame jacks we carry which can be operated with a drill. We do not have any options like the Bulldog # BD195318 with a drop leg.
view full answer... - Availability of Second Trailer Valet # STC-V211 Mounting Bracket for Use on Multiple Trailers
- Great news! You are looking for the part # TV-0002. This is the replacement mounting bracket for Trailer Valet Swivel Jack and Trailer Mover # STC-V211. This replacement can also double as a second mount for a separate trailer. The price will be listed next to the part below.
I have linked the above mentioned products to this page for your convenience.
view full answer... - Availability of a Pipe Style Mount Trailer Jack With a Power Drill Attachment
- The Trailer Valet JXS Trailer Jack # TV64FR is the closest we have to the Round, Pipe Mount Swivel Jack # TJP-7001S-B with a power drill attachment. This jack is only rated for up to 5,000lbs versus 7,000lbs like the jack you found. It also has a bolt on connection but has a similar pipe mount which allows you to easily remove and swivel the jack like the one you found.
view full answer... - A-Frame Mounted Trailer Jack That Has a Front Manual Crank and Electric Option
- Since all of our electric tongue jacks like the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 have the access holes for the manual crank handles on top of the jack, I recommend the Trailer Valet JXC Trailer Jack # TV54FR. This jack has a round mounting plate for the triangular A-Frame mounting holes on your trailer. While it is a manual jack the handle can be removed and the Drill Attachment # TVDA that comes with the jack allows you to use a 18 volt or larger cordless drill...
view full answer... - Wanting Bolt On High Capacity Trailer Jack Thats Easily Removable
- We do offer a 5K static/3K lift capacity bolt on jack that would be easily removed. Take a look at the Traler Valet # TV64FR. The jack will fit on frame members up to 4-3/4 inches tall x 3-3/4 inches wide. The jack can be swiveled up so its parallel with the trailer frame or simply removed by pulling out the pull-pin and sliding the jack off the pipe mount. The jack can be operated with an 18-24V cordless drill, using the included adapter which is a handy feature.
The rest of the jacks...
view full answer... - Replacement Mounting Plate for RV Ladder Support Peg
- The Replacement Ladder Support Peg for Stromberg Carlson RV Exterior Ladder - Rectangular - 5" # 8535 is the only replacement mounting part available. The manufacturer doesn't make just the mounting base plate as an independent replacement part option.
view full answer... - Bumper-Mounted RV-Approved Bike Carrier Options
- We have 2- and 4-bike RV-approved bumper-mount bike carriers that you can see on the linked page. These include platform style racks such as the 4-bike Swagman # S80600. Your bumper must be continuously welded (not just spot welded) in order to use any of these racks.
The Swagman S80500 rack provides 12-inches of clearance for a rear-mounted spare tire so it may not work with your bumper-mounted storage box. All RV-rated bike racks are shown on the linked page.
We also have an option...
view full answer... - Available Spare Tire Carriers for Use on RV
- We offer RV-approved bike racks in several types, hitch-mount, bumper-mount and ladder-mount, all of which are shown on the linked page.
If your RV has a continuously-welded bumper (not one that is only spot-welded) then you can use a bumper-mount spare tire carrier such as # UF15-954730. If you do not have a rear bumper that can support the weight of the spare tire then you might prefer a frame-mount tire carrier like # FHDSTC0101.
view full answer... - Highest-Capacity Bike Rack for Use on RV
- There are no RV-rated bike racks that offer a 5-bike capacity. The most bikes an RV-rated bike rack can hold is 4, as with the hitch-mount racks like the Swagman Original # S64400 and their Trailhead # S63381. Other 4-bike rack types are available, such as the bumper-mount Swagman 4 # S80600 which requires no hitch but which does require that your rear bumper be steel, 4- to 4-1/2-inches wide and be continuously welded along its entire length.
All RV-rated 4-bike carriers can be seen on...
view full answer...
Go To Results